Parameters controlling early age hydration of cement pastes containing accelerators for sprayed concrete

The objective of this work is to parametrize the early age hydration behavior of accelerated cement pastes based on the chemical properties of cement and accelerators. Eight cements, three alkali-free and one alkaline accelerators were evaluated. Isothermal calorimetry, in situ XRD and SEM imaging w...

ver descrição completa

Detalhes bibliográficos
Autores: Salvador, Renan, Pialarissi Cavalaro, Sergio Henrique|||0000-0002-9368-0898, Cincotto, Maria Alba, Domingues de Figueiredo, Antonio
Formato: artículo
Fecha de publicación:2016
País:España
Recursos:Universitat Politècnica de Catalunya (UPC)
Repositorio:UPCommons. Portal del coneixement obert de la UPC
Idioma:inglés
OAI Identifier:oai:upcommons.upc.edu:2117/90036
Acesso em linha:https://hdl.handle.net/2117/90036
https://dx.doi.org/10.1016/j.cemconres.2016.09.002
Access Level:acceso abierto
Palavra-chave:Shotcrete
Cement paste
Accelerator
Hydration
Kinetics
Sprayed concrete
Formigó gunitat
Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures::Materials i estructures de formigó
Descrição
Resumo:The objective of this work is to parametrize the early age hydration behavior of accelerated cement pastes based on the chemical properties of cement and accelerators. Eight cements, three alkali-free and one alkaline accelerators were evaluated. Isothermal calorimetry, in situ XRD and SEM imaging were performed to characterize kinetics and mechanisms of hydration and the microstructure development. The reactivity of all accelerators is directly proportional to their aluminum and sulfate concentrations and to the amount and solubility of the setting regulator contained in cement. Alite hydration is enhanced if a proper C3A/SO3 ratio (between 0.67 and 0.90) remains after accelerator addition and if limestone filler is employed, because undersulfated C3A reactions are avoided. Combinations of compatible materials are recommended to enhance the performance of the matrix and to prevent an undesirable hydration behavior and its consequences in mechanical strength development.